The price list for 2023 has been released and the issues of 2022 are available in stock. Register now for upcoming conference by emailing us at

Journal of Advanced Research in Modeling and Simulation

Instruction For Authors

Peer-Review Process

Plagiarism Policy

Authorship Criteria



Manuscript Preparation

Types of Articles Published

Submission Preparation Checklist

Withdrawal Policy

Authors from all over the world are invited to share their original research and ideas on theplatform of Advanced Research Publications (ARP) to get maximum impact in the scientificcommunity. Each paper submitted in Journal of Advanced Research in Modeling and Simulation (JoARMS) is double-blind peer-reviewed and professionally checked for quality.

JoARMS provides support to authors at every step in the process of publication.

Authors are encouraged to submit their work to JoARMS as the journal is supervised by highly qualified professionals working in reputed institutions backed by a competentpublication team. The following guidelines are framed for authors to draft their manuscriptswith ease.

Peer-Review Process

The critical evaluation of articles submitted to JoARMS by specialists who are typically noton the editorial staff is known as the peer-review process. The reviewer evaluates the paperbased on its quality, validity, originality, and adherence to proper procedures. JoARMSfollows the Committee on Publication Ethics' Ethical Guidelines for Peer Reviewers policy.

Two or more reviewers are assigned to articles that satisfy the minimum requirements. Peer-review is double-blind, meaning that neither the reviewers' nor the authors' identities aredisclosed to each other.

The initial step for a newly submitted manuscript is the plagiarism check. The next step is forthe editors to screen the manuscript; if they determine that it is not original, of insufficientquality, or outside the purpose and scope of JoARMS, they may reject it.

The minimum number of requirements for an article is met and it is assigned to two or morereviewers. A reviewer has fifteen days to offer his comments on a manuscript. The authorreceives reviewers' comments on the paper after it has been evaluated. The author sends therevised file to the reviewer once more. Satisfaction of the reviewers and editor is a mustbefore acceptance of the paper for publication.

Plagiarism Policy

Plagiarism is the use of someone else's ideas or works without giving due credit orpermission. At the submission stage, an automated plagiarism checker is used to verify allsubmissions for plagiarism, including self-plagiarism, which is illegal as well. JoARMS hasstrict policies against plagiarism. The articles are rejected if they are found to containplagiarised text. Our team at JoARMS has been verifying the similarity of submittedmanuscripts using the iThenticate software in association with CrossRef from 2021.

The authors are responsible for ensuring that the manuscript is entirely their work and hasn'tbeen published before. No words, figures, or tables from other publications may be used byauthors without proper citation and authorization.

Authorship Criteria

JoARMS complies totally with the following guidelines:

  • The person has made substantial contributions to the conception or design of thework; or the acquisition, analysis, or interpretation of data.
  • The person has drafted the work or reviewed it critically for important intellectualcontent.
  • The person has given final approval for the version to be published.
  • The person has given the agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work areappropriately investigated and resolved.
  • The person has taken full responsibility for the work, which includes making sure thatany concerns about the truthfulness of any component are duly looked into and addressed. The names and affiliations of each author should be given at the end of thearticle if it was submitted on behalf of a consortium.
  • The responsibility of the corresponding author is to communicate with the editor or staff of the editorial team of JoARMS during the manuscript submission, respond tothe reviewers’ comments, and further the publication process. He/she should providedetails of authorship, ethics committee approval, clinical trial registrationdocumentation, statements of conflict of interest and funding etc.


There are various permissions required to carry out research work and get it published in JoARMS - approval from the Institutional Ethics Committee or research ethics board,informed consent from the subjects or guardians under study, copyrighted or patentedproducts or technology etc.

The anonymity of the subject must be preserved in every submission. The subjects or theirparents/guardians must provide a written agreement for the author to use any figure in which the subject’s identity could be revealed. The author must include a statement in the articleacknowledging receipt of this consent.


Our self-explanatory online submission system will ease the process of manuscriptsubmission to JoARMS. Authors from anywhere in the world are welcome to register andsubmit a manuscript. JoARMS uses the Online Journals System (OJS) to submit and publisharticles. This system ensures a transparent and quick review process and makes it easier for authors, editors, and reviewers to communicate with one another. It also enables articlesubmission with progress tracking all the way to the proof stage.

Registration to our OJS is required before manuscript submission to JoARMS. If the authorhas already registered on our OJS, he/she can log in and submit the manuscript right away. If

this is the first time the author is using the system, he/she must first register before themanuscript can be submitted. We request that all persons who intend to register on OJSshould choose the options of Author and Reader. This will help the system to allow the user to act on both of these roles for JoARMS. We request you to provide your consent for theseroles which will further improve the quality of JoARMS and we will be highly obliged for it.

If you experience any difficulties during the process, please contact info@adrpublications.invia e-mail.

Manuscript Preparation


Microsoft Word is the recommended word processing format for the manuscript file.


The manuscript should be written in American English, British English, Hindi, etc.


The manuscript should be in single-column and have double spacing and 2.5 cmmargins all around.


All acronyms must be defined the first time they appear in the main text, abstract, and captions for figures or tables. Then, the abbreviated form should be used consistentlymoving forward.


The International System of Units (SI) must be followed when choosing measuringunits.


Equations must be editable and should be not utilised in picture format.

Title Page

The author should submit a title page that:

  • Summarizes the reasons due to which the paper adds value to the body of scientificresearch
  • Indicates the article's title and type (research article, systematic review, case report,viewpoint, letter to editor, etc.)
  • Provides all the relevant contact information of the corresponding author, including e-mail address, Orcid ID, phone number, and address for correspondence
  • Includes names and affiliations of all authors
  • Assures that the article has not been submitted or published anywhere elseFurnishes complete details for accurate analysis in case the article was previously submitted to another journal and was rejected
  • Indicates the financing source, if any
  • Indicates the author(s)' conflict of interest
  • Indicates the article's word count (not including the abstract, references, tables, figurelegends, and acknowledgments)
  • Indicates the number of tables and figures used in the article

Structure of Research Article

A manuscript/paper should not be more than 4500 words in case of original research or systematic or meta-analysis. For short reports, case reports etc., the number of words is less. A maximum of thirty references may be used. Generally speaking, these articles should not

contain more than six contributors, however, there is no limit to the number of authors, if thecontribution of each of them is justified.

The following arrangement is recommended when compiling a research article (optional):

  • Title
  • Authors
  • Affiliations
  • Abstract
  • Keywords
  • Introduction
  • Materials and Methods
  • Results
  • Discussion
  • Conclusion
  • Acknowledgment
  • Sources of funding
  • Conflict of interest statement
  • References
  • Figures and figure legends
  • Tables with caption


This part summarises the article's key ideas, presents the findings and conclusions, and clarifies the importance of the findings. It is important to note that the abstract should notcontain any references. It should not consist of more than 250 words. Please refer to for additional information.

The abstract of a research article should be structured including the following headings:

  • Introduction or Background
  • Objectives
  • Methods
  • Results
  • Conclusion

Abstracts can be unstructured for other categories of articles.


A minimum of three and a maximum of ten keywords are required.


The following should be included in the Introduction section:

  • Background information so that readers outside the area can comprehend thesignificance and goal of the study and place the paper in perspective
  • Description of the issue being addressed and its significance
  • A concise summary of the important literature
  • Conclusion by summarizing the main goal of the work (in brief)

Materials and Methods

To help other researchers use the work in further research, this section provides a brief description of the study settings, sample size, sampling method, study design, tools &techniques of observation and analysis, statistical tests, ethical approval, etc. This sectionshould be thoroughly described so that readers can find the scientific robustness of the study.


The primary study findings must be mentioned by the authors. The text, tables, and figuresshould display the results in a logical order, with the primary or most significant findingsappearing first. They should also make sure that tables and graphs do not include duplicatedata and should not be repeating tables into text.


This section should evaluate the results’ validity and compare them to related findings fromearlier studies using the appropriate in-text citation style. Here the results should be given with a concise justification of their importance and applicability. The limitations of themethods and the importance of the findings for additional research should also be stated. Itneeds to be brief.


This should clearly outline the research's key findings and provide an explanation of theirsignificance and applicability. This section can include the recommendations of the study which have wider application or public health importance.


A brief and accurate acknowledgement of support organisations, as well as any applicablescientific or technical assistance, should be included in this area. It is inappropriate to bring up standard institutional or departmental support.

Conflict of Interest and Sources of Funding

Financial, institutional, personal, and other relationships that could affect findings anddecision-making should be mentioned here. The authors should declare such associations, if any. It should be made very apparent if there isn't a conflict of interest.

A list of funding sources for the work must be declared by the authors.

In the article, disclosure of funding sources and conflicts of interest should come beforereferences.


The authors need to adhere to the Vancouver style guide for reference. References within thetext should be cited as superscript numbers. At the end of every manuscript, there should be anumbered list of references. Every reference should include the names of a maximum of six authors followed by et al.

A few examples of references have been mentioned below:


  1. Thakur P, Punia R, Mazumdar G. Python-based tic tak game. J Adv Res Model Simul.


  1. Jyoti, Patil R. Dynamic: design of cryptographic embedded security system in internet of vehicles. J Adv Res Model Simul. 2020;2(2):6-9.



Wilkinson IB, Raine T, Wiles K, Goodhart A, Hall C, O’Neill H. Oxford handbook of clinical medicine. 10th ed. Oxford: Oxford University Press; 2017.

Figures and Tables

Every figure and table should have an Arabic number assigned to it and should be cited in thetext at the beginning of the description (e.g., Figure 1, Tables 1 and 3). The figures and tablesshould be provided at the appropriate places in the text or should be grouped at the end of themanuscript to be submitted. There should be a caption for each table (maximum 15 words). Any non-standard symbols and abbreviations should have an explanation in the footnotes. In a similar vein, every figure needs a legend (no more than 300 words) or caption (no morethan 15 words). Any time a part of the figure is designated by an arrow, number, symbol, or letter, the legend should identify and explain each one. An example of a figure caption hasbeen provided below:

Figure 6.Oxidative Stress and Antioxidant Enzymes in the Liver of Experimental Rats

An example of a table caption has been provided below:

Table 6.Correlations among the Proteins

Please note that in order to reprint figures or tables that have already been publishedsomewhere else, the author(s) must get permission from the copyright holder.

Types of Articles Published

Other types of articles that are frequently published in JoARMS include, but are not limitedto, the following:


Short, invited opinion pieces that address a topic of immediate concern to the

clinical and scientific communities are welcome in this area. An editorial should not exceed aword count of 1000 words. It should not contain any abstract, figures, or tables and generallydoes not have more than five references.

Review Article: Instead of presenting original research, this provides a summary of thecurrent level of knowledge on a subject by summarising findings from several researchpublications. It includes an unstructured abstract, keywords, an introduction, additionalheadings that the author deems appropriate, a conclusion, and references.

Perspective: This offers a fresh perspective on an issue or idea, a novel theory based on pre-existing ones, or potential implications of a recent discovery or innovation. Abstract and keywords are not required in this kind of article. It might include headings if the authordeems them relevant.

Submission Preparation Checklist

Authors must check whether their submission complies with all of the following requirementsas part of the submission process; submissions that do not follow the following rules may bereturned to authors:

  • The submission has not been previously published, nor is it with another journal for consideration (or an explanation has been provided in Comments to the Editor).
  • Microsoft Word is used as the submission file format.
  • The title page has been submitted.
  • Wherever necessary, URLs and the dates on which links were accessed have beenincluded in the references.
  • All tables and figures are provided at the appropriate places in the text or at the end ofthe manuscript.
  • The text complies with the JoARMS's style and citation guidelines.
  • Conflict of interest and the source of funding have been mentioned.

Withdrawal Policy

JoARMS is committed to raising the standard of papers using processes such as plagiarismcheck, review, copyediting, and formatting. Our team puts in endless efforts to achieve thisgoal. Therefore, if an item is withdrawn in the midst of its processing, it is very discouraging.

We work hard to make the publishing process as convenient as possible for authors, and in exchange, we expect them to abide by all ethical guidelines. We adhere to the followingpolicy for the withdrawal of articles in JoARMS:

Within ten working days from the article's submission date, the author will receive an updateon the result of the plagiarism check of the article. Once the article is found to be free of plagiarised text, the author will be requested to share the Copyright Form with us.

A request for withdrawal of an article will be considered only if received within 15 days fromthe date of submission of the article or before the receipt of the copyright form, whichever isearlier. Article withdrawals from JoARMS following the submission of the Copyright Formare not permitted. An article may be withdrawn if it is determined that the reason for thewithdrawal is valid. However, if the payment has been made for the Article Processing Charges, it will not be reimbursed. Details of published articles that are withdrawn or retracted for valid reasons will be posted on our website.

Google Scholar Link

Indexing Information